• Skip to primary navigation
  • Skip to main content

Metal Detectors Guide

Top Reviews and Tips on Metal Detectors

  • Best Metal Detectors
    • Best for Kids
    • Best for Gold
    • Waterproof Metal Detectors
  • Metal Detector Reviews
  • Brands
    • Garrett Metal Detectors
  • Budget Metal Detectors
    • Under $200
    • Under $50

Garrett AT MAX Metal Detector Review 2020

June 5, 2020 By admin

Before going for the treasure hunting, the first and most important thing is to get a metal detector that you trust the most. When you are out in a new location, you will be relying all on your metal detector. So, make sure that your device does not betray you in the field. Otherwise, you will be trying to hunt all day, just to realize in the end that your device isn’t capable enough to find the metal you are looking for. When it comes to trustable metal detectors, Garrett metal detectors make it to the list.

Garrett AT MAX metal detector is a trustable metal detector. As per it is a new edition to the Garrett family, you might be confused about what exactly to expect from it.

garrett at max metal detector

Well! Here we have listed out each feature in detail. Read the full review in detail, and you will be able to set your mind on whether it is a perfect choice for you or not.

Garrett AT MAX is basically the combination of the Garrett’s AT Pro and AT Gold. They have combined the best features of the most desired metal detectors and made the ultimate machine for metal detector enthusiasts. 

Z-Lynk wireless technology

Before we go on and discuss further features, I think it is essential to have a look at the most distinctive and appealing feature. Garrett AT MAX waterproof metal detector comes with Z-Lynk wireless technology, not only that it has new Garrett MS-3 Z-Lynk wireless headphones too. Previously, when wireless technology was not being used, some delays were observed during detection. The metal detectors were able to detect the metal buried deep, but there was a problem in defining the exact location. To eradicate this problem, wireless technology was introduced. It means that the detector will identify you as soon as you are over the target. No more delays and digging on the wrong spots.  

Wireless headphones were used in the previous versions as well. To be honest, they are way better than the wired ones. The output is more clear and vivid. Plus, no one loves the tangling wires. In my experience, keeping wired headphones is way more difficult than wireless headphones. So, it is headed up on wireless headphones from my side.

If you have used wired headphones before, you must already know the struggle. Every time you want to put the metal detector down, you will have to take the headphones off as well. For me, this is the most irritating thing ever. So, wired headphones are a big NO for me.

If you are a beginner, here is a piece of advice for you. Never leave your headphones at home. If you are stuck with wired headphones¸ it is better to have them then having nothing at all. Your metal detector will make sound, even when you are not wearing headphones, but you will not be able to hear them. Plus, if you are in a public place like sidewalks or parks, it will be hard to distinguish them from the noise coming from outside. 

Greater depth detection

While checking out a new detector, performance is the first thing that must come to your mind. Well, the performance is fantastic. As it offers more increased transmit power and enhanced electronics. It can even detect the treasures which have been buried for a long time, which no previous detector was able to spot. If you have any old metal detector, you can do some experimenting and find out about the performance difference between the two metal detectors. Choose some areas for hunting. First, search with the old metal detector for a while. When you are done. Search with Garrett AT MAX metal detector with enhanced technology. You will be surprised to know how much treasure is left undetected by the previous metal detector.

Features 

  • Optimized frequency​

The frequency of every metal detector varies. You will have to select the one which is well suited for you. For example, you are into finding coins made from silver, brass targets, jewelry, this unit is the perfect option for you. It offers a frequency of 13.6 kilohertz. It is much better from the previous versions and well suited for finding small targets that are usually ignored by other metal detectors. 

It is even capable of finding small gold nuggets. Also, though, it is not designed explicitly for finding such delicate and small items. If you are really into finding small gold nuggets, you should probably keep looking for a better-suited metal detector. 

  • High res ground balance

Ground balance is another critical feature. The performance of your metal detector depends on it a lot. The detector also features 175 points of high res ground balance, which is why it is able to function properly even when the ground is highly mineralized. If you have been doing metal detection for a while, you must be aware of the fact that the soil on which you are searching has a high impact. If you are searching on the beaches, the sand will be highly conductive. Especially, saltwater beaches are highly mineralized. Electric and magnetic waves do metal detection, so if you are searching on high mineralized and conductive areas, chances of false alarms are increased. Your metal detector will start beeping like crazy, and it will be hard to spot any treasure. This is why ground balance is important. If your metal detector has efficient ground balance, you will be able to search even in challenging environments.

  • Multiple modes

There are several modes available in Garrett AT MAX metal detector. If you have a look at the screen, you will see many modes mentioned on the left side. 

  • All-metal mode

The first and the most used one is the all-metal mode. As it is pretty clear from the name, you will be able to use this mode in multiple challenging environments. All-Metal mode, you’re provided with the greatest detection depth and sensitivity. I think it is justified to say that it is the most stable model. If you want to hit even the smallest targets, this one is the right option for you. Even if the target is buried deep in the sand, it will be detected. You might hear a faint sound, but you will have to hear closely if you want to hit maximum targets. The only problem with this mode is that there is no clear discrimination. Obviously, no one wants to dig for an hour and end up finding a bottle cap. With this mode, you will be notified even if a nail is detected. So, the only drawback is that while using this mode, you might end up finding a lot of trash. 

If you want to do more discriminative searching, there are three more modes available Custom, Coins, and then Zero.

  • Custom mode

For me, the custom mode is the most interesting one. You can set the settings according to your desire and then save it for using it later. Normally, this mode is suitable for searching for rings and coins. But not everyone is looking for these two things. So, if you are not interested in finding them, just change the settings and save them for later. This practice will help you in saving a lot of time and effort. Plus, once you are able to find the perfect setting according to your location, you will not have to change it again and again.

  • Coins Mode

As per it is pretty clear from the name, coin mode is specifically designed for finding coins. Here the condition is a little more specific, and it can find all U.S coins. The best part about this mode is that you will not end up with trash. The detector will only beep when a coin is detected. There will be no false indications. But there is a little drawback to this model. When you are searching in coin mode, there are good chances you will miss out on small items like jewelry or relics. 

  • Zero Discrimination mode

If you want to just go for a stroll in the park and there is not something which you are specifically looking for, then this mode is perfect for you. This mode is also suitable for the situation when then the target’s signal is not very consistent. In the zero discrimination mode, you will be able to hear different sounds when different goals are spotted as compared to the all-metal mode.

  • Distinctive tones

Every target has different conductivity, which is why it is important that it has a different audio tone as well. If you hit the target with a digital target ID rating from 0 to 34. The audio sound is going to be extremely low. You will only be able to hear the tone from headphones. It will be inaudible if you do not have your headphones on, and you are in a public place. It shows that the target has a really low level of conductivity. If you are not interested in such targets, just ignore the beep and move on. 

If the target has a digital target ID rating of 35 to 75, you will hear the mid-tone. This one is comparatively much louder than the previous tone. For example, if you spot a gold ring, you will hear this sound. When you are using the all-metal mode, this sound will be produced no matter what the target is, except if you were using All Metal Iron Audio. 

If your target ID rating higher than 75, you will hear a high pitch tone. This tone is produced when the conductivity of the target much higher. Normally, when the Garrett AT MAX has spotted a bigger piece, this tone is produced.

  • Iron Audio Mode and how it works 

It has Iron Audio Mode too. This model is specifically designed to detect items that have a greater value of iron. You can turn this mode on according to your desire. The best part is that it produced a unique sound when an item is with higher iron is detected. It produces a sort of like a low-medium-low beeping sound. This feature helps in saving time. When you are searching in All metal mode, it is recommended to turn this mode on as well so that trash items are detected.  

Comparison with other metal detectors

Garrett AT MAX vs. Garrett AT Pro

Well, a review is never complete unless we have compared it with another metal detector. In the above-mentioned metal detector, the biggest difference is Z-Lynk wireless technology. As mentioned earlier, this technology is much faster than Bluetooth and helps in reducing the delays. Garrett AT Pro lacks here as per it does not have this technology due to which the results are delayed and sometimes not so accurate. With AT Pro, there are greater chances of missing out on a buried treasure. Even if the metal detector can spot something valuable, the response will be so delayed that you will not be able to spot the exact location. 

Another major difference is the backlight. Garrett AT MAX comes with a user-friendly interface, and the control panel has a backlight. Which means you do not have to worry when the sun goes down. In AT Pro, there is no backlight, which is a huge setback. It takes away the leverage of searching at night or during the dawn. You will have to take an extra spotlight with you if you are looking forward to metal hunt at night.

Watch this video for the detailed comparison:

 

Pros
  • Amazing performance
  • Inexpensive
  • Multiple modes
  • Z-Lynk wireless technology
  • Control unit backlight
  • Ground balance
Cons
  • At this price, there are none

Conclusion

Garrett AT MAX is one of the most user-friendly and amazing metal detectors. It is fully waterproof to up to 10 feet. The performance is excellent even in challenging environments like when the soil is extremely mineralized. It comes with advanced Z-Lynk wireless technology, which means that there will be no more delays in results. There are several modes available, and you can choose the best one according to your desire. Not only that, but it is also really inexpensive. With the number of features this unit has to offer, the price is really low. You can buy this even if you are on a budget.

  

 

Filed Under: Review

Minelab CTX 3030 Metal Detector Review 2020

May 18, 2020 By admin

Looking for a high-performance metal detector that can produce excellent results even in unfavorable conditions? You have come to the right place. Minelab CTX 3030 could be an excellent choice, especially when you are looking for an all-rounder product. But before you take on the decision to buy the product, you are advised to read the full review.

minelab ctx 3030 metal detector

There are many industries that are producing a new range of metal detectors with more advanced features every day, but Minelab CTX 3030 still holds the top position. Even though some people complain about it not being budget-friendly, but with the number of features it has to offer, the price is justified.

It offers features which no other metal detector has to offer up to date. It comes with wireless audio, superior target separation, and built-in GPS. Not only that, but it also comes with color display and advanced FeCo discrimination, along with Minelab’s famous FBS multi-frequency technology. It’s better to have a look at all the features in detail so that you can make an informed decision. 

You Might Also Want To Read: Best Metal Detectors for All Use

User-friendly design and ease of use


Minelab CTX 3030 Metal Detector has the reputation of providing the most accurate results. But apart from performance, the first and most important thing is the interface. User is going to judge the performance once they have got their hands on this product. So, it is extremely important that the user understands the control buttons easily.

There is no denying the fact that appearance plays an important role in setting the mood for hunting. Minelab CTX 3030 Metal Detector comes with a pretty decent color combination. It comes with an attractive grey and black color scheme, along with a matte finish on the stem. The matte finish even increases the level of sophistication and gives a neat effect.

As I already mentioned, this metal detector is designed for every age and height, which is why it has an adjustable stem. The stem itself has a minimum size of 37”. It can be extended to 55.3”—the adjustable stem feature help in increasing the balance and versatility of the unit. Also, you are going to be hunting in several different areas; the height of each location varies. You can adjust the length of the stem according to that.

For me, the best part is that it has rechargeable batteries. Previously, metal detectors used to come with replaceable batteries. Every time while being out for the hunt, it was important to keep an extra pair of batteries. It comes with a dedicated lithium-ion battery pack. Considering the fact that these batteries are pretty expensive, you are going to save a lot of money by recharging them. The only problem is that these batteries happen to run out pretty fast. It is not surprising seeing the fact that it offers a bright screen and fast processor. Before going on a hunt, make sure that the batteries are fully charged. Hopefully, it will be able to last throughout the day. Another sight of relief is that it has li-ion technology, which means that the batteries are charged at a much faster rate as compared to before.

Another important thing to mention here is the weight. I am going to be straight about this— Minelab CTX 3030 Metal Detector is a heavy machine. It weighs 5.2 pounds with the lithium-ion battery pack. So, if you are looking for a lightweight machine, this one is probably not the right option. With the number of features, this unit is offering the heavyweight is not something you should complain about. On the bright side, it is a well-balanced detector. Even though it is heavy, but it does not mean that it is uncomfortable to hold or carry around. Most of the weight is contained in the control unit, and you can hold it with both hands, and continue the metal hunting without any worries. Plus, the audio functions are wireless. Which means you will have one less thing to worry about. Sometimes, the metal detectors are lightweight, but they are still extremely uncomfortable. It because they are not well balanced, and they have a bunch of wires swinging out of it. So, we can say that Minelab CTX 3030 is more desirable when it comes to comfort and ease of use. You will feel freer while using this unit.

If you love to hunt at rivers, creeks, or the beach, we have some good news for you. The detector is also waterproof down to a depth of 10 feet. It doesn’t exactly mean that you can submerge it in water. It means that it is suitable for wet conditions and surrounding where the air is dense, like rivers and lakes. Even though it is a versatile metal detector, but the headphones are not waterproof. Make sure that you keep them safe from any wet condition. The headphone module and WM 10 module are not waterproof, so if you think that you are even going to experience a splash of water, remove these modules.

check price

Features 


  • Multi-frequency VLF detector

Fond of using multiple frequencies? Good. Because Minelab CTX 3030 is here to offer multiple frequencies in a single unit. The frequency ranges from 1,5 kHz to 100 kHz. You can search for multiple locations simultaneously. There are a total of 28 frequencies, which means that there are almost no chances of losing a metal inside the ground. The plus point is that it lowers the chances of detecting trash items. Which means that you are going to get more work done in fewer hours. No more hours of searching through the ground and ending up with trash. There is no other device available which offers such precise searching techniques. All the devices available in the market mostly have a single frequency, which is not suitable. The other ones offer multiple frequencies, but the range is extremely low as compared to this unit. With Minelab CTX 3030, you will not miss any valuable target. So, honestly, what more are you looking for? 

  • Ten search modes

Minelab CTX 3030 offers you the highest number of search modes. Previously even the best-rated metal detector had only five basic search modes. But this unit offers you everything in doubles. Five of them are pre-set automatically, and the user can switch them on and off. These five include Relics, Coins, Silver, Beach mode, and High Trash for littered locations. When you select these options from the display, a separate regime will appear on the screen. These will help you in speeding up the process of searching. Apart from built-in regimes, Custom regimes are also available. You can tune the device according to specific conditions. While hunting, the situations can vary from time to time. So, sometimes the basic search modes are not useful. You can set the search modes according to your desire. Not only that, if you like the custom setting, but you can also save them and use them later.

  • FeCo Discrimination 

You might be seeing this name for the first time. This is the new technology that helps in enhancing the detector’s ability to identify a metal target while ignoring undesirable trash. You can clearly see from the LCD screen whether the target is trash or something valuable. Now, you don’t have to waste hundreds of hours digging, just to end up with trash. The detector analyses both the ferrous and conductive properties while showing these on the LCD.

  • Ground balance 

Ground balance, another important feature which you should check in every metal detector. Like everything else, the ground balance in Minelab CTX 3030 is perfect. It offers both manual and automatic regimes. Automatic ground balance is ideal for mixed and mineralized soil only. If you are fond of searching for inhomogeneous soils, it is better to switch to a manual setting instead. It will take a while before you can set the ground balance according to your requirements. But this skill needs to be learned from experimenting and learning more about different types of soils. Ground balance single-handedly cannot save the day for you. You will have to make the perfect combination with the search modes as well. Minelab CTX 3030 has to offer many options. Each one of them is perfect for challenging scenarios. The rest depends on you. You will have to learn about the settings provided and when to use them. 

  • Noise Cancel Mode

During metal hunting, you are going to come across unexpected scenarios. The ones which you have never thought about. Take the example of an electric wire passing from the ground. When your metal detector is going to search in such an area, the magnetic field will be generated by the electrical wires. You can end up having a false alarm. While using other metal detectors, you will fall for it and start digging the ground, but while using Minelab CTX 3030, you are on the safe side as per it has strong Noise Cancel Mode. It will detect and cancel all the noise, and you can smoothly continue the metal searching.

  • Integrated GPS and PC Mapping   

Hands this is one of the most advanced features expected in a metal detector. As per it is pretty clear from the name, this feature is related to your location. While hunting, you can turn the GPS on, and it will record all the places you have searched. When you are done, you can upload this record on your PC and have a look at all the places you have searched for. Amazing! No? You might be thinking of how this feature is going to help you with better metal detection? 

Basically, while using this feature, you are practically keeping the record of every place you have searched. It can help in spotting the places which have better protentional. Also, if you accidentally miss any area, you can easily spot it. These can also be marked as new WayPoints and uploaded back to your CTX 3030, so you can easily find them on your next hunt. While you are out on the hunt, you can turn on the GeoTrails feature. It shows all the areas where you have hunted. This way, you will not miss out on any place.

You can also add comments and photos using Minelab’s Xchange 2 application. You can keep the record of every move and add desired notes on it as well.

  • Customization 

Minelab CTX 3030 has to offer what no other metal can, user customization! And we definitely love this feature. Take the example of an audio tone feature. Normally, the audio tones come with a factory setting. You cannot change them according to your desire. But with CTX 3030, you can set the tone profiles, ranging from a single tone up to 50 Co (conductive) tones. Not only that, but there are also four audio types, including normal, long, smooth, and pitch hold. So, feel free to set everything according to your hunting style and taste. 

  • Control Panel and Display

minelab ctx 3030 display

Even though the display is clear and vibrant, you might get confused at first. If you haven’t used a metal detector before, it is recommended to watch a YouTube video or read the manual. This is just a precautionary measure; there is nothing to worry about. The interface is user friendly, and you will be able to catch up fast. But it will require some practice in the beginning. To keep things simple, there is a total of 11 buttons on the screen. The rest of the screens appear depending on the model which you have selected.

As compared to other metal detectors, you are going to need more time to learn about the control panel. There are so many options and modes available that it can get overwhelming at times. Seeing this problem, the developers have made sure that the unique options are available right in front of you. There are quick menus available for more common options like sensitivity and ground balance.

Minelab CTX 3030 offers the best user interface. It offers a color display, whereas the other metal detectors are black and white. Most of them don’t even have a backlight.

  • Performance in the Field

Obviously, when you are buying a metal detector, the first thing you are going to be concerned about is the performance. All the other features come second. Minelab CTX 3030 offers you excellent target ID, separation, and sensitivity. The accuracy is fantastic. With all these features, you will be able to spot every valuable target. The best part is that it will leave out the trash items. Another fantastic thing is that, and it does not matter where you are searching, the results will always be perfect. It does not matter whether you are searching in ploughed land, beaches, shallow water, or pastures; the performance is great all the time. 

For enhancing the performance, even more, the FBS technology is used. This technology has been proven to produce excellent detection and comparison. Basically, it works by sending 28 frequencies in the ground. This way, the whole area is combed, and no value able metal is left behind. Because of the several frequencies being used at the same time, the depth is enhanced. Even the smallest targets will be detected. If different metal detector is used in the same place, they might miss out on small targets. Not only can this unit detect a small target, and it can discriminate between the target, which is hidden behind small nails.

As far as the target ID’s are concerned. They couldn’t ask for a more accurate target ID. In another metal detector, the biggest problem does not have a perfect working target ID. Thankfully, with this unit, you will not face any similar problem. It provides accurate target information at a depth of 9” or more. The ability to discriminate between trash and treasure can help you in saving a lot of time. It also provides rapid response with no lag, near-instant target ID, and almost unlimited customization. So, it is safe to say that it provides you with the perfect hunting experience, and performance in the field is excellent. 

check price

Comparisons with Other Detectors


Minelab CTX 3030 Vs. E-trac

Even though Minelab CTX 3030 has no match in the market, people still get confused. E-trac comes with the same technology as CTX 3030 i.e., the company’s FBS technology. The decision is definitely going to be a tough one. Well! The reality is that the name of the technology is the same, but when it comes to performance, CTX 3030 is way better than any other option. The FBS technology used in CTX 3030 is the upgraded version as compared to E-trac.

It is a well-known fact that both the above-mentioned detectors come with an 11” DD coil and a relatively large backlit display. So, why do they have a performance difference? The CTX’s more powerful processor is better at processing incoming signals, so you’ll miss fewer targets and can cover ground faster. Apart from that, CTX 3030 is faster, provides better target separation, and can search deeper.

Both detectors are waterproof, but E-Trac only has a waterproof coil. These are the small differences between two detectors due to which they have performance and price difference. You can easily get an E-Trac at just $900, which is why most people fall for the trap and buy the cheaper detector. Well! If you are paying less money, there are going to be some compromises on the performance and features.

Frequently Asked Questions

What accessories are included?

Minelab CTX 3030 Metal Detector comes in a whole package. Pretty much every feature is present inside the unit. If there is something left, it is covered as an accessory. If you buy a standard package, it will come with a set of KOSS UR30 headphones along with the DD search coil. But the accessories depend on the package and retailer, and you are buying from. If you are in luck, you might end up getting much more than this.

Can I use the CTX 3030 at the beach?

CTX 3030’s comes with advanced FBS technology, which means it is suitable for hunting every environment, whether it is wet for dry. If you want to go hunting underwater, you can do that too. Basically, it has a function known as “Seawater.” This function helps in getting 100% results even when the conditions are not favorable, especially when you are searching in wet sand. The wet sand tends to be highly conductive due to which the chances for false alarms are increased. When seawater function is turned on, the sensitivity is maximized, and it is able to hit even the smallest targets. If you want to get perfect results, it is recommended to turn off ground balance. 

Where is the Detector On Sale?

Minelab CTX 3030 is a famous metal detector; it is easily available in every store. But as per an Australian company produces it, it would be hard to find it outside of Australia. So not worry, it is easily available on famous online stores like Amazon and eBay. If you are not in a hurry to buy it, just keep on checking the rates and wait for the perfect sale to come up. These things are available at extremely low prices on black Friday. So, wait for the perfect sale to come up and grab your piece. 

Is there a warranty?

It comes with a 3-year warranty on the coil and control box. Before you start using it, it is recommended to go through the warranty policy. 

Pros
  • Amazing sensitivity, depth, and target separation.
  • Advanced features like GPS tracking
  • Waterproof to a depth of 10 feet
  • User-friendly display and interface
  • Easy customization
  • Ten different modes
  • Automatic and manual ground balance
  • Rechargeable battery
Cons
  • Heavy
  • Expensive 
  • Low battery timing
  • Complicated for beginners 

check price

Summary

For some severe and professional metal detection, Minelab CTX 3030 is the first choice. It comes with the best features and offers amazing performance. It is one of the top metal detectors you can find in the market. 

If you have a tight budget, you might find it a little expensive, but the price is worth it. If you want to enjoy innovative features like GPS and FBS technology, you will have to pay accordingly. If you are serious about metal hunting, it is definitely worth it, and you should make this investment. But if you are just picking a metal detector as a hobby and want to go for a stroll in the park, such an expensive machine is not worth it.

It is a complex machine. If you are a beginner, you will definitely take some time before you can start hunting like a pro. There are so many options available that it can be hard to choose one. Plus, settings are different for every situation. You will have to experiment and learn according to different scenarios.

Even though this machine is expensive and complex, but metal hunters are shifting to this machine rapidly.  Minelab CTX 3030’s excellent performance is helping people shift to the ultimate level of perfection. It will be able to detect the hidden treasures which are normally ignored by other metal detectors. Plus, you will have the ultimate fun while using advanced features like GPS tracking.

Filed Under: Review

Garrett Ace 350 Metal Detector Review

April 28, 2020 By admin

You might have heard about a lot of metal detectors available online and in the markets. All these metal detectors have various features, and they are fit for certain functions. From the past few days, there is a massive fuss about a new metal detector from Garrett that has a user-friendly interface, and it is best for both beginners and experienced hunters. 

Yes, you have got it right, I am talking about a very famous Garrett Ace 350 metal detector. Below is the honest review of the Garrett Ace 350 metal detector, its specs, qualities, advantages, and disadvantages. Let’sLet’s have a look at it. 

Garrett Ace 350 Metal Detector – Full Review

Appearance: 

garrett ace 350 metal detector review

Identically Garrett Ace 350 is a look-alike of Ace 150 and 250, and we can say that it is almost similar to some more advancements. It has a typical appearance for which all the Garrett metal detectors are famous for the same black body with yellow detective material. Though there is no such importance of which color does the device has, but I have observed many people usually fall in love with this color combination, and that’s why they go for garret ace 350. In short, we can say that it is a sleek design with the same black-yellow appearance. 

When we talk about the display of Ace 350, its little difference from Garrett Ace 250, it has a wide golden area with even higher iron resolution. Both of these features cover a wide space. That’s why they can perform even in a better way. Ace 350 has a higher frequency to target things with its D’D’ shaped coil. The other display features are as follows

  • Target ID
  • Sensitivity Indicator
  • Detecting mode
  • Coin Depth indicator
  • Battery level indicator

garrett ace 350 display

Garrett Ace 350 Metal Detector Features: 

Ace 350 has many advanced features. It is one affordable metal detector specially designed to locate coins and jewelry. This metal detector is not very high priced, but it can still perform high-end functions, and that’s why it is quite popular among the common people. Recently, I have heard that the company has stopped its production, and you might not found it in the market, but worry not, Garret Ace 350 is still available in online stores. Many of its features, like DD coil customizable discrimination settings, are not usually found in other cheap metal detectors. 

This unit has the main five search modes that make it one exceptional metal detector. Ace 350 is capable of enhanced iron and customize discrimination settings. And it also has a higher frequency as compared to all other entry-level instruments. 

check price

Segment based Target ID: 

Ace 350 doesn’t have a numeric system, but instead, it now has a segment based system to identify the target. Fundamentally, a dark fragment will show up beneath the relating image on the Target ID Scale to give you a thought of the objective’s size and the kind of metal it is. For instance, just for your understanding, we can say that a portion will show up underneath the 30 penny coin image on the Target ID to demonstrate a high-conductivity focus related to the size of the quarter.

Since the Target ID is affected by a variety of facts, including the size of the item and its direction in the ground, it can’t be totally exact; you might have to see some variations but, most of the time, neglectable. For instance, we can say that an aluminum bottle cup may appear as a quarter on the ID scale. Hence the ace 350 has segment based target Id that offers quite reliable means of your metallic target. 

Also read this: 

Garrett Ace 400 Metal Detector Review

Better Iron resolutions

As compared to all previous models, Ace 350 has better segments of iron resolutions. That gives more accurate results and makes Garret Ace 350 one of the best metal detectors available right now. 

As compared to Ace 250, which has only one iron resolution segment, ace 350, on the other hand, has multiple. That helps in finding even smaller gold targets. 

Different search Modes 

Search modes are discrimination patterns in easy language, and they are used to limit the search options, especially when you are locating certain items like gold, coins, or jewelry. The search modes work by basically removing certain fragments from the Target ID Scale. Garrett Ace 350 has the following search modes that make it different and advanced from all the previous models. 

  • Jewelry
  • Custom
  • Relics
  • Coins
  • Zero ( without any discrimination)

All of them work pretty well. Once you start using Ace 350, you will realize that you don’t use built-in search modes that often. Once you have selected any particular search mode, it will automatically remove all other segments. For instance, you have selected gold. Ace 350 will only now detect items that have gold like gold coins or gold jewelry. 

You can adjust all the segments by simply using notch buttons. But remember, the custom setting will be retained till the next time you turn the detector on. 

Frequency

One of the reasons why Garret Ace 350 is different from its previous models Ace 150. 250 is because of its different frequency. Garrett ACE 350 operates at the frequency of 8.25 kHz, but on the other hand, Garrett ACE 250 works at the frequency of 6.5 kHz. It enables Ace 350 to find targets like gold, and that’s both previous models. 

Pinpointing: 

Unlike all other metal detectors, Ace 350 has easy to use and nice pinpointing technique. When you need to use the pinpointing technique, there isn’t any hectic job or procedure. You just need to push the ” pinpointing button,” and the detector will further do its job. But always remember you have to hold it down for a while, once you have selected the target. 

The best way is, once you have pushed the button, keep moving the search coil, and bring it up on your target, now let’s dig it in the target and ace 350, will do the rest of the work. 

Search Coils: 

The Ace 350 metal detector has several search coils. It has a capacity that works great with the following search coils options. 

  • 8.5″ x 11″ DD Search coil 
  • 9″ x 12″ Concentric Search coil
  • 6.5″ x 9″ Search coil
  • 5″ x 8″ DD submersible search coil
  • 4.5″ Sniper Search coil

Above all, the best thing is Ace 350 has a DD coil, that allows it to even search larger target area and beneath greater depths. 

Coin depth-in indicator:

Sooner or later, you are going to need to attempt coin shooting with your metal finder, and this component will help you in that limitlessly. Presently with the DD coil, you may be imagining that you will have the option to discover coins further than with the ACE 250; in any case, in my tests, I haven’t seen practically any distinction the two of them go down to around 8 inches.

But before going for shooting with your metal detector, it is essential to set a certain search node. Otherwise, you might end up hitting everything around you. 

Some additional features of Garrett Ace 350 are as follows. 

  • Depth indicator: it gives you the rough idea of how much deep you can go. 
  • Electronic pinpoint mode: that enables you to pinpoint your target using the laser technique. 
  • Three audio tones:  low, medium, and high are the three audio tunes levels that are useful in additional target ID. 

What’s In The Box? 

The ACE 350 box contains the detector when it comes to the box is unassembled. It has the following things in the box.

  • the 8.5″” x 11″” DD search coil
  • the instruction manual
  • an instructional DVD
  • a pair of Garrett’sGarrett’s Clear Sound headphones.

The total weight of Garrets Ace 350 metal detectors is round about 2.8Lbz. Though this weight is idle for adults, it’sits little too much for the kids of younger age. In addition to that, always remember that 350 is waterproof; it can even search items below the water, but its control box is not waterproof at all, and that why it needs a lot of care. 

Now let’s have a look on pricing details of Garrett Ace 350 

Pricing: 

Garrett 350, is available at under $300. In my opinion, this price is justified as compared to previous models. The reason is its advanced search modes and higher frequencies. Ace 350 is easily available at many online stores, including amazon.com. It comes with the2 years warranty of limited parts and labor warranty from the day you have bought it. 

check price

Wrapping up!! 

So here are all the essential details, you need to know about the garret ace 350 metal detector. Though there are a variety of metal detectors available, it might confuse you while making the best decision. It is one of the best metal detectors available in the market right now and at a very affordable price. If you are in search of the best metal detector, I would suggest you go for ace 350. 

Watch this video series to know more about Garrett Ace 350 metal detector:

Part 1:

 

Part 2: 

 

Part 3:

 

Part 4:

Part 5:

Part 6:

Part 7:

Part 8:

 

Filed Under: Review

Garrett Ace 400 Metal Detector Review

March 31, 2020 By admin

Garrett is the name known to every metal detector enthusiast, and why not? It has been known for producing the best quality metal detectors. It promises to provide you with the best quality and options according to the situation provided. With Garrett, it is guaranteed that the spending every penny is going to be worth it.

With Garrett, you will not have to worry about ending up with more trash rather than treasure. It offers all the best features like iron audio, digital target ID, adjustable frequency. For increasing the stability levels and extra cam, locks are also provided. If you have previously used the older versions like ACE 350, you will be more than happy in using Garrett Ace 400. In easy words, Garrett Ace 400 is the more enhanced and better version of ACE 350.

Let’s have a look at deeper details so that you can make an informed decision. 

Design and Appearance 

garrett ace 400

While choosing a metal detector, your main focus is going to be in the features and performance. What most people neglect are appearance and design. For me, the design is as important as any other feature. If you are not comfortable using the machine, you will not be able to enjoy the whole experience. Thus, it will result is you getting easily tired and losing all interest. 

As compared to the previous versions of Garrett Metal Detectors, this one is comparatively lightweight. It weighs 2.9lbs (1.3kgs). Even if you plan to metal hunt all day long, you will not feel tired. While designing this product, your ease and comfort have been put forth to be the first priority, which is why it has an adjustable stem. You can adjust the stem up to 40″ to 53″.  You can easily adjust it according to your height and use it according to your desire. For me, the plus point is that it offers more stability as compared to the previous versions. It has a separate camera stand, which adds up to the stability.

Not that the appearance and the color of the device hold any importance, but there are some people who give special importance to the appearance. The outer body is made from a bright yellow color. Even though I do not appreciate such radiant colors, but if we look at the positive side, you easily spot it from a distance. So, no more worrying about it getting misplaced. Do not worry, it is not unattractive, but for some people, it might not be according to their taste.

If we talk about the previous versions, they were not stable enough. Due to which most of the people felt uncomfortable. Compared to that, Garrett Ace 400 Metal Detector is far more comfortable. It has cam locks available. It ensures that the detector feels more stable throughout the swing. If you still feel that the coil is unstable, try to change the length of the search coil.

Another important thing is the battery life. For me, it is the most vital thing. In my opinion, the battery should last at least throughout the day. One cannot go through the pain of charging it multiple times while hunting. Thankfully, Garrett Ace 400 Metal Detector has four AA batteries, which provide around 25-hours of search time.

Other than that, the frequency adjustment option is a mentionable option as well. You can adjust the frequency according to your needs, especially when the frequencies are colliding with other metal detectors. This normally happens when you are searching in the form of groups, and another person is using the same metal detector.

check price

Important features of Garrett Ace 400 Metal Detector

  • Digital Target ID

target id garrett ace 400

Normally, Garrett users do not have any complaints. Still, in the previous versions, it was notified by many users that not having the Digital ID feature makes things difficult for them. In Garrett Ace, 400 digital target ID is present. The numeric numbers are shown from 0—99 on the screen. This feature comes in handy when you are trying to find a specific type of metal. You just have got to enter the metal ID in the system, and rest will automatically be done by it. The only problem you are going to face is that the segment approach is that it’s too broad in its metal identification. To overcome this problem, the 0-99 scale is used. Using it, you only have got to enter the specific ID and your work in done.

In the previous versions, the metal detector was only able to identify whether metal coins the present in the ground or not. But with Garrett Ace 400, you will be able to identify whether the quarter is silver or clad and if a penny is copper or clad.

  • Distinctive audio features

While buying a metal detector, audio features are the last things that are on the mind of a new buyer. In my experience, audio features are extremely important. As you already know, Garrett Ace 400 comes with all the best features, and when it comes to audio features, it definitely has to offer something amazing. It has a three-tone audio system. If we talk about it in simple words, it emits three different tones whenever metal is detected. Previously, the problem was that it was identified that the metal is detected, but there was no indication about the type of metal. This problem has been eradicated in Garrett Ace 400.

If metal is detected with higher conductivity, a high-pitched, loud tone is generated. If the medium or lower-pitched sound is produced, it means that metal with low conductivity has been detected. It also comes with “Pulse-Width Modulation” audio. This technique has correctly been used in newer versions of metal detectors. This is used to enhance the audio features. It produces high pitched and clear noise so that the metal identification is easy for newbies as well.

  • Iron Audio system       

You must have already heard about the audio discrimination system. But the previous technologies were only able to discriminate between different types of metal. Garrett Ace 400 Metal Detector comes with the most amazing technology. It has been able to differentiate between different types of iron targets. Sounds amazing, no? During all my metal hunting years, the main problem was that the metal detector only used to differentiate between different types of metal due to which it was hard to hit specific targets hard. The best part about this particular technology is that it helps you in eliminating the chances of getting the ghost signals.

The intensity of the signal’s changes according to the target it is hitting. For example, if you hit a small target, a very low-frequency sound will be heard. When the target is large, the sound will be quite audible and distinctive. This approach is extremely helpful when you are surrounded by trash. It will save you from unwanted digging. You only have got to dig when the sound is loud, audible, and clear.

Although iron audio has proven to be extremely helpful to me at times, there were situations when I had to turn it off. Mainly when a lot of iron trash surrounded me, it would start bombarding with signals. It is only helpful in situations where the trash quantity is much less. 

Apart from that, it has another fantastic feature. The discriminative iron segments are increased, which helps in better detection. Now four segments are used due to which performance is improved. The detector can now easily discriminate between trash and actual iron deposits.

  • 12 separate search modes

If you have been doing metal searching for a while, you must be aware of the importance of the search modes. There is no denying the fact that they help in enhancing the performance and making the search process much easier for you. Garrett Ace 400 Metal Detector has 12 notches used for discrimination. Selecting these modes is not a problem; they are displayed on the screen. There are separate segments available for each option. In front of each segment, a small description is available, which shows an item in each segment is likely to be. By selecting these segments, you can tell the metal detector to ignore the undesired items. In the Garrett Ace 400 Metal Detector, five separate modes are available. If you are a beginner, it is highly recommended to start by choosing the most well-suited option for you. Manually, adjusting frequencies can also work, but in the beginning, it is always better; it takes baby steps. 

There are five basic modes.

Zero discrimination

As per it is pretty clear from the name, this mode is designed to detect anything, which is metal without any discrimination. You will notice that there is no separate segment available for this model. If you are interested in finding things without knowing about the metal type, just turn this mode on, and you are good to go. 

  • Coins

As per coins are pretty small items, there are good chances of finding trash with it. This mode will help you in eliminating trash, pull tabs, and foil. It will be able to detect large-sized jewelry, and if you are looking for medium-sized jewelry, there are chances you are going to miss it while using this mode.     

  • Jewelry

This is the best mode if you are specifically looking for jewelry items. All the trash items will be ignored. The main focus will be on bracelets, rings, and lockets.

  • Relics

This mode is the opposite of the jewelry mode. It will the relics mode eliminates smaller iron items while detecting potentially lower conductivity targets.

  • Custom

If you like to do things in your own way, Garrett Ace 400 Metal Detector lets you set the frequency in your own way. There are accept and reject buttons available. You can use this eliminate segments you don’t want to detect. This mode is the reason why Garrett Ace 400 Metal Detector has received so much attention and appreciation from the users. It has increased the versatility and made it easier to use. 

In the beginning, it might be a little tricky to adjust the settings according to your desire. But when you get your hands on it, the whole process will become much easier for you. Here is a little example for you. Imagine you are looking for silver coins, just eliminate the copper and zinc segments, and you are good to go. 

Waterproof search coil

 Garrett Ace 400 Metal Detector is well known for its stability, ground balance, sensitivity, and depth. The standard package has an 8.5″ x 11″ DD search coil. There are several additional coils available as well. Examples include a Super Sniper 4.5″ search coil, 5″ x 8″ DD coil, and a 9″ x 12″ PROformance coil.

Ground Balance

Even though Garrett Ace 400 Metal Detector is almost perfect when it comes to features, but unfortunately, it has a small set back. You cannot set the ground balance manually. Although the factory setting is pretty amazing, some people prefer to set it according to their requirements. If you are a beginner, it is not going to be an issue. Even if you get your hands on a metal detector that offers manual ground balance settings, it is recommended to go with the factory settings in the beginning.  

Learning to do perfect ground balancing settings is truly an art. So, if you are not an enthusiast, this is one less thing to worry about. If you are looking for searching in high mineralized places, it is recommended to look for a metal detector that has manual ground balancing settings. In places like beaches, which have wet sand, Garrett Ace 400 Metal Detector will not be able to provide its 100%.

Manual ground balancing is available in rather expensive and latest versions of metal detectors. With this price range, you will not be able to enjoy this feature.

Performance

As a beginner, people are concerned about whether they will be able to use it easily or not. The best part is that while using Garrett Ace 400, you do not have to worry about this problem. It is extremely easy to understand. A clear description is written. Even if you are still confused about using it, go through the manual thoroughly, and you are good to go. There is no need to memorize anything. 

If we talk specifically about the performance, it is undeniably good. Even though the device words perfect in every condition, but you can set the sensitivity levels according to your desire. But even when the sensitivity levels are set to low, it will be able to produce amazing results. 

If you love to collect coins, you will be amazed to know that it picks out the deepest buried coins in no time. For different metal, the different audio system is installed. For coins, a bell tone is used.

The most amazing thing which I have observed is that by using the Garrett Ace 400 Metal Detector, you can get so much done in much less time. Previously, metal detectors were prone to produce false alarms, and thus half of the day was wasted in digging out the trash. Garrett Ace 400 has proven to be amazing when it comes to detecting trash.

Control panel and Display

garrett ace 400 display

Easy to use, and the handy control panel is the first choice of every user. Garrett has been known for producing a user-friendly control panel. If you have used Garrett metal detectors in the past, you must be aware of the control panel and the Display. One thing which I have liked the most is that the user interface i.e., control panel, has not been changed a lot as compared to the previous options. All the major brands tend to keep the Display the same in all the improved versions to become the user’s confidant. To be honest, I, too, find it hard adjusting to the new display unit and learning from scratch to use the control panel. So, it is safe to say that Garrett Ace 400 Metal Detector saves you from all this pain and offers you clear and straightforward to use.

Garrett has tried to make things as simple for you as possible. With every button on the control panel, the name is mentioned. If you haven’t used a metal detector in the past, don’t worry, it will not be a problem for you. Everything is written in bold, clear words. After exploring it for a while, you will notice that clear visual aid and information are provided, like expanded Target ID Legend with coin denominations. 

The only problem is that when you are out in the field, it is hard to read the printed legends. It is a healthy practice to do your homework beforehand and do your research on the field you will be working on and the modes you will be using. When out in the field, it will be hard for you to see the legends. You will only be able to see the target ID, which is the major thing you will be using.

Price

Price! The first and most important question comes into every buyer’s mind. Well, Garrett Ace 400 comes under the category of affordable metal detector. You will be able to grab your hands-on outstanding performance and features at just $400.

Cam locks and adjustable frequencies

Garrett Ace 400 has amazing stability and balance. The addition of cam locks achieves it. Camlocks are a simple, plastic locking mechanism that adds strength and stability to your detector. The balance will not get compromised while you are swinging the metal detector. 

Normally metal detectors have three pieces. No matter how stable the metal detector is, the connecting points of these pieces can always cause disbalance. The basic purpose of these cam locks is that it tightens up those joints and makes one solid piece.

Apart from that, you can adjust the frequency of your metal detector manually. Normally, the single frequency of the VLF machine is broadcasting at 10 kHz. But there is a time where it is important to lower the frequency. Especially when you are group hunting, power lines, and other electrical interference such as WIFI signals can also make a metal detector go crazy. During the normal hunting spree, you will not feel the need to change the frequency, and it will work just fine.

check price

Comparison with other metal detectors

There are many names and brands that claim to provide you with the best metal detector. But I have a firm belief that Garrett metal detectors are far better than any other leading name. Especially when it comes to an entry-level metal detector. Each product is extremely affordable as well as it offers the best performance.

Garrett ACE 400 Vs. ACE 200 and ACE 300

The previous versions Garrett ACE 200 and Garrett ACE 300 are were amazing as well. Garrett ACE 200 was a basic metal detector that was specifically designed for beginners. It was known to be an all-rounder. Garrett ACE 300 came with much better options and improvements. The most noticeable feature was the addition of two new search modes. It helped in improving performance. 

Garrett ACE 400 is the combination of the previous versions and by far the most in-demand metal detector. All the features which were included in Garrett ACE 300 are included in it. In order to make the searching experience amazing for you, additional features have been launched as well, like new Iron Audio feature, a powerful DD search coil, higher frequency, and volume control headphones. 

ACE 400 Vs. AT Pro

Putting the personal preferences aside, AT ProPro is far better than ACE 400. We all know that All Terrain series takes the top position when it comes to metal detectors. Even though the performance is equally good, but if we compare the sensitivity levels, AT ProPro is far more sensitive to smaller objects. Plus, the recovery time is good, which means that it can easily separate from the closer targets. 

Even though Garrett 400 is waterproof, but it does not mean that it can be submerged in water. AT ProPro has this advantage, it is submersible to a depth of 10 feet. If you want to do underwater hunting, you will be able to do it with no problem. So, one can easily say that it is a two in one metal detector. 

Another noticeable feature is the ground balance. If you are looking forward to searching in the places where there is high mineralization, it is better to get AT ProPro. It has both manual and automatic ground balance, which means that it can produce better results even in harsh conditions.

FAQ 

What accessories are included?
Well, when I am about to buy something, this is the first question which comes in my mind too. As per, it is designed for beginners, the accessories available with it are also pretty simple like easy-stow headphones (including volume control), a coil cover, ACE cover-up and manual. Sometimes additional things are also included, but it mostly depends on the retailer from whom you are getting your things from. If you are lucky enough, you can get your hands on some extra coils. But to be honest, that only happens once in a blue moon. Otherwise, you will only get covers. 
Spoiler title
If you are looking to work in a wet environment, it will work as per the coil is waterproof. By wet environment, I only mean the early morning grass, which has dew on it. It’s not like you can search in the rain as per the control center is not waterproof. You can search on the edge of lakes, streams, or creeks. DO NOT submerge it in water. Even a small splash on the control box can cause permanent damage.
Can I use it on a beach?

As I mentioned earlier, this device is not suitable for use in the high mineralized environment. Usually, when the beach sand is wet, it can lead to false positives. 

If you are looking forward to going for only dry sand beach hunting, it can be perfect for you. Just keep in mind it is not designed for wet environments, so try to keep away from water. 

What is the ACE 400i?

While searching for Garrett Ace 400 Metal Detector, you must have come across this name. It used to confuse me in the beginning as well, but then I came to know that these two basically have got to a major difference. The 400i is the European version of the ACE 400. The only difference is the ‘iron discrimination’ feature as we all know that the European sand has more deposits of iron as compared to other areas, which is why metal detection can sometimes be challenging.

Where is the Garrett ACE 400 for sale?

As we all know, Garrett is a pretty well-known brand. You will not have any problem finding them in stores. You can easily spot them in any hardware store. If you are not a big fan of going to stores, you can always order them from online stores. Amazon delivers them all across the world. If you are not in a hurry to buy it, I would recommend waiting for a good deal to come up. This way, you will be able to save some bucks.

If you are looking for secondhand stuff, eBay and Craigslist are the most trusted sites. I would recommend thoroughly check the whole product and test run it before buying it. Never make a hurried decision. If you are using the metal detector for the first time, make sure to read the manual. It is always better to ask someone for assistance. YouTube videos are a big help, as well. Before you go out and start hunting in an open field, do some test runs in your back yard.

Pros and Cons of Garrett ACE 400

Even though I am a great admirer of Garrett, it still has some drawbacks

Pros
  • Iron audio 
  • Digital Target ID
  • Powerful performance
  • Affordable 
  • Accurate results 
  • Large, DD coil
  • Four iron discrimination segments
  • Multiple mode options
Cons
  • No manual ground balance settings
  • Not enough accessories 
  • Cheap quality of headphones 
  • Cannot be submerged 
  • Not well suited for children. It can be heavy for them
  • Summary and Final Rating

check price

Final Verdict

If you have been searching for metal detectors for a while, Garrett is the name you must have seen in every list. When it comes to the manufacturing of perfect metal detectors, Garrett is the name that comes to our mind. They have managed to produce affordable metal detectors without compromising on the performance. With every edition, the number of features has been increased and improved. 

If you do metal detection as a hobby and like to swing metal detector for hours for finding coins, relics, or jewelry, I am sure this is the right option for you. These are extremely lightweight. You will not get tired even after using them all day long. As per this, one is an entry-level model, so not expect it to do military level detection. It is specifically designed for beginners, children, and people who like to swing it around as a hobby. But do not get me wrong; the features it provides are enough to do some serious metal detection.

It has a 24 months warranty, more than any other brand will offer you. They have probably covered everything under warranty, but it is recommended to check the policy before you start using it recklessly. The company will not cover any physical damage.

Even though this device is capable of producing perfect results, but not have a manual ground balance is the biggest drawback for me. If you are looking forward to work in dry and low mineralized areas, it will work just fine. But it is definitely not recommended for high mineralized regions. The signals will get all jumbled up, and desired results will not be produced. Try to keep away from beaches and wet sand. 

Filed Under: Review Tagged With: Garrett

Garrett AT Pro Metal Detector Review 2020

November 13, 2019 By admin

Looking to buy Garrett AT Pro Metal Detector? In this review, we have listed all the details and features that will make it easy for you to decide whether it is a good fit or not.

Garrett AT Pro is one of a kind metal detector that is used by many for metal detecting adventures. A lot of professionals also use Garrett AT Pro for metal detection. You can find any metal with this detector, including silver coins, relics, gold, and whatnot. 

Garrett AT Pro Metal Detector
Image Credit

Garrett AT Pro is in our list of Best Underwater Metal Detectors. This metal detector is particularly famous among the fans because it can work underwater for about 10 feet. However, the headphones that come along with it are not precisely waterproof and thus can’t be used underwater. If you need to do some underwater researching and need to submerge the headphones as well, you will require waterproof headphones that can be bought separately. This metal detector can, however, be used in all terrains and can find uneasy targets, including platinum rings on the saltwater beach or gold nuggets in the west. 

The learning curve with this metal detector can be a bit of a challenge at the start, but once you get to know it well, it will be straightforward for you to use. You can also take help from Garrett AT Pro Manual in start to find everything about it. The AT Pro is quite affordable and has excellent qualities, and unlike other expensive machines, it has advanced features at affordable price.

Also Read: Bounty Hunter Gold Digger Metal Detector Review

 

Features of Garrett AT Pro 

Let’s have a look at the features of Garrett AT Pro and learn more about the actual performance of this product and provide you full Garrett AT Pro review. 

  • Look & Feel – The Design of Garret AT Pro

Garrett AT Pro design

Garrett AT Pro is a VLF metal detector meaning it is an all-rounder when it comes to detecting metals. It uses four double-A batteries and features a nice padded armrest. The “AT” of Garrett AT Pro means “All Terrain,” which means it can be used on any terrain. The machine is quite durable and has excellent exterior. The machine requires very little maintenance and can handle almost anything you throw at it, quite sturdy.

The machine is quite lightweight, only weighs 3.03 lbs, meaning you can use it for longer durations without getting tired. 

  • Waterproof design

garrett at pro waterproof

This Garrett AT Pro Metal Detector Review will help you thoroughly analyze the pros and cons of Garret AT Pro. It is a great advantage that you can use Garrett AT Pro for up to 10 feet underwater. It is good for hunting in all shallow waters like rivers, creeks, lakes and can be even used in sea.

Mostly detectors only have a waterproof coil, but Garrett AT Pro is completely submersible in water. 

  • Detectable items

You can find anything ranging from jewelry, coins, or relics with Garret AT Pro; however, the performance with gold nuggets is spectacular due to its 15kHz frequency and unique ability for ground balance. 

An 8.5” x 11” DD performance coil comes with Garrett AT Pro. This coil is excellent for target separation. AT Pro also can accommodate other coils like a sniper coil and concentric coil.

Frequency 

It features a 15kHz frequency, which is higher than any other VLF detectors at this price. Garrett AT Pro, due to its higher frequency, is good at detecting even the smallest targets. Its frequency is also suitable for finding gold. AT Pro is a single frequency detector, you can make minor adjustments to it, but it is so not a multi-frequency detector. 

Pro Mode Audio 

Garrett AT PRO MODE AUDIO

Garrett AT Pro for sale usually contains two audio modes, including standard and pro audio mode. Both modes cab further be used with three search modes but offer different audio experience with mode modes. 

Standard mode is just perfect for the beginner, and three audio tones decipher the metal conductivity. The pro mode, however, offers more information about the depth of the target and its composition. The discriminations modes are still the same, but faint tones indicate the targets in-depth with addition snapping as per the composition. 

Standard mode is useful, but you have to try the pro mode once you are more comfortable with this metal detector. 

Digital Target ID

Garrett AT Pro Digital Target ID

The AT pro features a large target ID right in the center of the screen. This offers you the best and accurate information regarding the target composition, and it is better than the category read-out. Target ID is great for finding the metal type of target. The target ID of Garrett AT Pro is quite efficient, mainly when the ground balance is proper.

Notch Discrimination 

There is a notch discrimination feature which can find objects with conductivities that are above the iron region, about 12 discrimination segments which can be either rejected or accepted. Notch feature is entirely custom, but you can ignore it in zero search mode. Zero modes aren’t all-metal mode, but it can perform a quite similar role.

There is another COIN mode, which means that all metals like iron or foil have been already notched out, so you can find coins easily. 

The current target can also be eliminated from the discrimination pattern using the ELIMINATE button. You can eliminate any item that is giving constant signals, but you are sure that it is trash; it will be rejected with the eliminate button. 

You have to be a little careful using the discriminations. Real targets can be missed out if they are of the same size and composition, so be careful using too much of this feature.

Iron Discrimination

Garrett AT Pro Iron Discrimination

There are about 40 segments for iron discrimination, and you can adjust the settings you will be able to exclude all the ferrous targets or adjust the discrimination depending upon what you are trying to find. 

You can set iron discrimination values to probably a higher value so you can ignore junk and nails (set the value between 30-35). But you can lower these values if you are searching for relics. 

Ground Balance

Garrett AT Pro Ground Balance

AT pro features automatic and manual ground balance. This helps you in the ground balance as per the mineralization in the soil, that is why this detector can find targets in even highly mineralized grounds like saltwater. AT Pro is so efficient that it can cut out the excessive chatter caused by mineralization in the ground.

The automatic ground balancing function is quite great because you have to push the “GND BAL” button on any ground, and the machine will calibrate as per the ground condition. Manual ground balance settings are available if you ever need them. 

Display & control panel

AT Pro’s control panel is quite easy to understand and use even in the field. The top of the control panel features a legend that shows potential target categories. It is nice to know what the target will most likely be but do rely on the target ID and audio more than this feature. 

When you are creating custom discrimination patterns, you will find the legend feature more useful. You can use the “Notch Disc” button to control what you dig and accept or reject segments.

The display is not very great because there is no backlight, no threshold adjustment, and there is also no option for volume control — all minor complaints.

All these features make it one of the best metal detectors for 2020.

Garrett AT Pro Video Review

 

Garrett AT Pro Metal Detector Commercial

Final Words

Garrett AT Pro Metal Detector for sale is quite an easy find on Amazon.com. It is one of the best Garrett Metal Detectors you can buy in 2020. The price is around $600. It is a great device, excellent for finding all kinds of metals. 

Filed Under: Review Tagged With: Garrett

  • Go to page 1
  • Go to page 2
  • Go to Next Page »
  • Privacy Policy
  • Terms Of Service
  • Contact Us
  • Affiliate Disclosure
COPYRIGHT © 2019 · MetalDetectors.guide, ALL RIGHTS RESERVED.